![Regrind material quality](https://www.triaplastics.com/core/vendor/timthumb.php?src=https://www.triaplastics.com/media/claim/Qualit_Macinato_800x600.jpg&w=800&h=600&zc=1&q=70)
Regrind material quality
Mechanical and physical properties of plastics unchanged.
Lower dust, fines and angel hair.
Homogeneous and uniform regrind constantly produced.
- Screen surface area approximately 50% of the rotor circumference optimizes granulate discharge
- Cutting chamber manufactured and designed to meet the customer demand for material type and size
- Bench knive setting jig maintains correct gap between fixed and rotating knives
- Rotary discs fitted to the rotor avoid overheating and dust production
![Energy efficiency](https://www.triaplastics.com/core/vendor/timthumb.php?src=https://www.triaplastics.com/media/claim/Efficienza_Energetica_800x600.jpg&w=800&h=600&zc=1&q=70)
Energy efficiency
Low running cost expressed in kWh/kg.
Only 10% of installed power consumed during no productive operation, remaining power available for plastics scrap grinding.
Reactive power cosϕ reduced to minimum thus having a direct impact on hourly energy cost.
- Combined effect of cutting edge and knives position to reduce cutting stress
- Double roller rotor bearings installed by torque wrench to ensure free and perfect rotor revolution
- Rotor and fly-wheel combination designed to minimize shaft torsional waving
- Transmission design gives higher inertia thus allows minimum speed reduction
![Easy of operation and maintenance](https://www.triaplastics.com/core/vendor/timthumb.php?src=https://www.triaplastics.com/media/claim/Facilit_Manutenzione_800x600_2019_1.jpg&w=800&h=600&zc=1&q=70)
Easy of operation and maintenance
Advanced engineering design.
Safety of operator during use and maintenance.
Reduced maintenance frequency and down time.
- Easy tool free access to screen, hopper, grinding chamber on most models
- Openings, access distance and safety sensors engineered and installed according to CE standards
- Adjustment of fixed and rotating knives via a bench jig
- Automatic lifting and opening devices, sensors for monitoring and opening, fly-wheel brake to give safe knives change
- Fly-wheel and pulley installed by expansion bushes.
- Grinding chamber structure is bolted for ease of changing a single part or side
![Efficient solutions](https://www.triaplastics.com/core/vendor/timthumb.php?src=https://www.triaplastics.com/media/claim/Efficacia_Soluzioni_800x600s.jpg&w=800&h=600&zc=1&q=70)
Efficient solutions
Return on investment specific to each application.
Reliability through running time.
Maintenance frequency according to production line down time.
- From the 80’s enhanced attention to technical solution for in line recovery for all technologies
- Systems supplied to meet all health and safety requirements and standards
- Diverse production range of machines for recovery of scraps of varying size and weight
- Complete transport system, de-powdering, air filtering, storage and dosing units for regrind material
- Side discs, antiwear chamber and water cooling of grinding chamber