Extrusion

Extrusion

Manual feeding at 1,5 m from ground of sheets, pipes and profiles 6 m long. Single and double traction groups with pneumatic dancing arms and inverter ensures steady feed of edge trims (up to 100 m/min) and constant tension with the production machine. Grinding chamber with 3, 5 or 7 rotary blades, for processing all resins, PLA, ABS, EPS, PET and all products, expanded, honeycomb, full and deep sheets.
Special applications for custom systems, cutting devices, injectors and infeed rollers, unwinders and special coating.

Regrind quality material

Extrusion

Homogeneous and uniform regrind constantly produced. Mechanical and physical properties of plastics unchanged. Efficient and precise grip thanks to the dedicated cutting chamber section.

Efficient solutions

Extrusion

Systems supplied to meet all healt and safety requirements and standards. Diverse production range of machines for recovery of scraps of varying size and weight. On board soundproofing for in-line productions

Energy efficiency

Extrusion

Transmission design gives higher inertia: only 10% of installed power consumed during non productive operation, 30-50% during grinding time.

Easy operation and maintenance

Extrusion

Reduced maintenance frequency and downtime by advance engineering design. Safety of operator during use and maintenance. Easy access without the use of tools to the main parts subject to routine maintenance.

Applications

PVC pipes PVC pipes
Corrugated pipes Corrugated pipes
HDPE pipelines HDPE pipelines
Extruded profiles Extruded profiles
Honeycomb sheets Honeycomb sheets

XT SERIES

XT series

Granulators dedicated to scraps recovery from rigid or flexible extrusion for small sprues or heavy moulds, suitable also for second step grinding of pre-crushed pieces.

XR SERIES

XR SERIES

The new TRIA granulator of the XR series is able to satisfy the most particular needs. Ideal for fast extrusion line and thinner thickness of material, PS, PP, PLA, PET with slippery and sticky additives. Main features: speed regulation from 0 to 156 m/min, possibility to set to zero the traction unit speed with active accumulator avoiding slipping of rollers and breaking of material during the change of the reel, remote control with Bluetooth application, small footprint.

TPL SERIES

TPL SERIES

The extrusion of profiles involves the production of bulky scraps, which must be quickly ground with a simple feeding by small granulators; this requirement are satisfied by TPL new version machines for the offline grinding of profiles with height up to 200 mm, pipes, tubes and sheets.

TRK SERIES

TRK SERIES

The machines of TRK series satisfy the growing needs in the field of trims recovery from extruded PS, PP, PET, PA sheets with thickness from 0.1 to 3.0 mm. These needs are related to the use of most tenacious resins, to increments of speed and thickness that require granulators performance increasing. This series of very silent machines responds to all these needs.

GR SERIES

GR series

Granulators for the grinding of large amounts of sheets, profiles and tubes of large sections scraps. Possible placement in the pit for an easier feeding.